- Tipo: Trato Privado
— Sector: (Metalúrgica), (Electrónica) Ensamblaje de Componentes,
- Localización: () República Checa — Inspección:
- Comisión comprador: 0.00 %
- Fechá máxima de pago: — Fecha máxima de recogida:
Descripción ampliada:General Description
- Production started on 2001 and the initial investment cost reached 3.100.000 €.
- The line was installed by FAGOR ENSAMBLY and the main manufacturers of components were FAGOR, KOKATU, MASSER, SCAME, MIYACHI, ELABO, RS-MARKET, SANTA LUCIA, STAUBLI, ADEP.
- The line occupies 630 sqm (machine + services) and the required facilities are air, water and industrial tension.
- Installation to aspire insulating compound powder. Lately, this material is re-used.
Production Characteristics
- According to the tooling and the means available at present, the line produces 145 & 180 mm diam. hotplates, with different finished in its connection system: bonding stud connection, ‘Faston’ connection, plate including cables.
- Line work stations: 16 persons to produce standard or bonding stud plates; 20 persons to produce ‘Faston’ and cables plates.
- Machine cycle: The posts marked by the machine cycle are of 6 seconds per piece.
- Capacity: Working at an 80% average, depending on the model produced, the estimated capacity is of 3,800 pieces per 8 hours.
Main Sections
- Stage 1: Resistances positioning
- Stage 2: First insulating compound dosing and pressing.
- Stage 3: Plates outlet from Stage 2, positioning on tooling, marking and pressing.
- Stage 4: Joining coils and plates
- Stage 5: Dosing and pressing the second insulating compound
- Stage 6: Drying and polymerizing furnace
- Stage 7: First electric breakdown control
- Stage 8: Terminal and protector welding
- Stage 9: Component mounting: stamped plate enclosed back part, ceramic block, tying central screw, ceramic block riveting. 100% control of the electric characteristics.
- Stage 10: Piece features engraving.
- Stage 11: Piece painting and air drying
- Stage 12: Ring positioning and quick plates red-dot marking
- Stage 13: Packing
- Stage 14: Enclosed plates with connection system: ‘faston’ or cables included.
- Auxiliary dust aspiration equipment
Others
A part from the enclosed plates mounting line, there are other equipments used during the assembling operations described before. Those installations are used to:
- Machining of the cast plates.
- Protection treatment against corrosion
- Ring polishing and cleaning
